This is the last blog post I will be carrying out as I hand in my stuff tomorrow. I am going to use this chance to have a quick reflect on the year and my project.
To begin with I was quite nervous and unsure of what I was going to be doing. I had various ideas throughout semester 1 which kept on changing which I got anxious about. Aspects of my idea were kept throughout - I wanted to design and create a relatively big 3D environment. I wanted this environment to be scary and I wanted it to be situated in a Mental Asylum.
After receiving my grades for semester 1 I was a little disheartened. I felt I had worked really hard and did not get the grades I was hoping for. This nearly put me off even trying in semester 2 as I felt, no matter how hard I try, I won't get much of a grade. However, after reading a book which I was hoping to help me create a story for my game I became much more interested and eager. The book was Sebastian Barry's 'The Secret Scripture'. I thoroughly enjoyed this book and decided to adapt it for my game. The other aspect of semester 2 that really engaged me was using Unreal Engine 4. I had never used this before but when I seen some tutorial videos online, I realized that I wanted to use it so much. After speaking to my supervisor about it, he enthusiastically encouraged me to go for it and download it.
I did so and it has become one of my favorite parts of this project. As much as it is tricky, I enjoy the problem solving aspects of coding and setting the levels up. As my game progressed, and my skill level progressed, I found myself enjoying it more and more.
As for my dissertation, I started that quite late however, due to my constant blogging and research, I did not feel rushed or stressed for time with this. Admittingly each section was difficult to start but once I had stuff written down, I quickly managed to form it into a well structured dissertation. The feedback I have had so far on it has been great. My lecture feels I am good at academic writing and am getting along well with it.
Tomorrow is when I had in my portfolio and blog. Later in the week I will hand in my dissertation. The following week I have my final presentation and then to finish; my exposition. This year has gone fast but I will be glad to be at the end of it. Constant stress gets tiresome after a while! I apologize if this has been a sloppy post but it is currently 3am and I am moments away from finishing my work. One thing that I have always disliked about hand-ins is the preparation for them. I was finished my work around 11pm and it has taken over 3 hours just to sort it and arrange it suitably for hand-ins. I wanted to get it all done tonight so I could move my focus onto dissertation tomorrow (next week).
Overall I have enjoyed myself more than I thought I would through this whole experience. My supervisor Ryan has been a great helped and has helped keep me enthused throughout. I am looking forward to the exposition as a chance to relax and show the work I have completed through the year. I went to last years one and it looked like a lot of fun.
Showing posts with label Personal Development. Show all posts
Showing posts with label Personal Development. Show all posts
Monday, 27 April 2015
Weekly Update - End Of Week 4 (April)
This was the last major week of work before hand-ins. Here is what was done:
This Weeks Intention
This Weeks Intention
- Polish whole environment and finish up ready for handing in on Monday
- Use Sunday as a last overall check up and prepare everything for hand in on the Monday
This Weeks Results
- This week has been a very successful week. Monday was spent editing my dissertation after receiving feedback from my supervisor. I have not touched this since and will not be doing so until I have handed in my portfolio.
- The main objective this week was to complete and polish the game. I gave myself a room per day which worked out very well. Most of the days I was ahead of myself and managed to get a little more completed than intended.
- Saturday and Sunday have been two difficult days. I did not get what I wanted to complete on Saturday completed so that fell over to Sunday. This then made Sunday much more difficult.
- I did however manage to get everything completed to a very satisfactory result.
Next Two Weeks Plans
As This will be my last blog (pretty much) I will show what my plans are for the next two weeks regarding my other hand-ins:
Week1 - 27th April - 3rd May
- Monday 27th - Hand in Portfolio & Blog. Complete all references in Dissertation. Quick look over dissertation
- Tuesday 28th - Spend all day going through dissertation, perfecting it. Tuesday night, prep dissertation for hand in.
- Wednesday 29th - Hand in dissertation
- Thursday 30th - Design and order: Photobook and Business cards (Exposition)
- Friday 1st - Sort out Posters for exposition
- Saturday 2nd - Create final presentation
- Sunday 3rd - Practice Presentation
Week2 - 4th May - 10th May
- Monday 4th - Present Presentation. Plan further development for Exposition piece. (fixes etc)
- Tuesday 5th - Apply final changes to game. Record Video for showcase. Semi Prepare for showcase
- Wednesday 6th - Prepare everything for showcase set-up. Look at interface. (Maybe set up at night)
- Thursday 7th - Set up showcase - morning. Evening is beginning of showcase (See lecturers)
- Friday 8th - Showcase
- Saturday 9th - Showcase
- Sunday 10th - Showcase
- (Monday 11th/Tuesday 12th) - End of showcase/pack up showcase
Personal Notes
Personally I am very happy to be near done. I do enjoy planning out the weeks like I have above as it gives me a clear indication of aims and goals. It also makes everything feel a lot easier. I will be carrying out one more blog post after this as a big final year review. I am handing this blog in tomorrow so I will not be posting anything more onto it.
Sunday, 19 April 2015
Weekly Update - End Of Week 3 (April)
Once again, this has been a successful week for my project. Here is what was achieved:
This Weeks Intention
This weeks plan was to complete:
This Weeks Intention
This weeks plan was to complete:
- Complete testing of 'beta' version
- Attempt 'Discussion and Results' in dissertation (Maybe Conclusion)
- Blog out exposition
- If time - complete Main and methodology of dissertation
This Weeks Results
After meeting with my supervisor a lot had changed with regards to my project through is own recommendations. This was no issue at all but here is what was completed this last week:
- Dissertation is fully done - apart from referencing and proof reading
- I have completed the 'Padded Cell' level of my game
- I have researched and blogged about the exposition
For End Of Next Week
Next week is pretty set in stone for what I want to do as it is my last week before hand ins. I am goign to spend a day on each part of my level to complete and polish it:
- Tues = Bedroom
- Weds = Dormitory
- Thurs = Lobotomy
- Fri = Grave
- Sat = Hallway
- Sun = Final touch up, one last blog, double check over hand in specification
I will spend Monday going through dissertation. This will be completed next week.
Personal Notes
This will be one of the last blogs I complete as the next week is purely practical work. Next Sunday I will do another end of week blog as well as an end of semester blog.
Sunday, 12 April 2015
Weekly Update - End Of Week 2 (April)
Another successful week has gone by - here is what was achieved:
This Weeks Intention
This weeks plan was to complete:
This Weeks Intention
This weeks plan was to complete:
- 'Beta' version of game
- Further development of Intro/Main & Methodology of dissertation
- Plan showcase stuff - prints etc
This Weeks Results
Once again I have had a very successful week:
- 'Beta' version of the game is now complete - This will be used for testing next week
- Main is near on complete and intro is the same. Just need a minor conclusion for intro. Methodology has also been complete. This will be getting checked by my supervisor for some feedback
- I have looked into what needs done for showcase and have got a rough plan of action:
Things Needed for Showcase
Business Cards
Posters/Print outs
Sketchbook
Book (novel)
Video (back-up)
Write-up
As for timing. these can be sorted much later - they can all be sorted after my major hand in's so no need to worry overly. Mon 27th April - Sort Poster Prints. Thurs 30th April, design and purchase 1. Business Cards 2. Sketchbook Mon 4th May Create Video and complete Write Up
For End Of Next Week (Week 3)
- Get testing completed on Beta version
- Attempt 'Discussion and Results' in dissertation (maybe conclusion)
- Blog about exposition
- If time - complete Main and Methodology
Personal Notes
I feel a little stressed with the testing and writing out results. I only really have next week to do that as I want to save last week for polish. I am glad to know my supervisor is back and I will be speaking to him tomorrow so can sort issues then!
Monday, 6 April 2015
Weekly Update - End of Week 1 (April)
With relation to my blog post regarding Plan of April, I have decided that I will give an update of my progress at the end of each week, as well as what the plan is the following week.
This Weeks Intention
This weeks plan was to complete:
This Weeks Intention
This weeks plan was to complete:
- 'Alpha' version of Game
- Intro, Main & Methodology of dissertation (basic)
- Look into showcase - prints etc
This Weeks Result
This week went extremely well and I managed to complete the list and do some more:
- 'Alpha version of game is complete - I also managed to construct a video to use for the showreel
- Intro, Main & Methodology have been done - a little bit bet than 'basic' too!
- I looked into thing that need doing and here are some notes on the following: Business cards can be printed after hand ins (plenty time), go speak to UrbanPrint Dundee and Abertay Binding about booking slots/prints, showcase template will be sent to us soon, printing a photo album book of final work (sketchbook) can be done after hand ins
Overall it has been a very good week. I have now composed another in-depth plan for next week:
For End Of Next Week (Week 2)
- Complete 'Beta' version of my game
- Refine, Main and Methodology of Dissertation (possibly Intro)
- Decide what to have printed (Maybe Blog showcase research
Personal Notes
By taking each week in turn (and then each day in turn) I am finding it ok to cope with the work. I am slightly nervous about the whole thing but that's just something I'll have to deal with until it's done! Planning like this is helping a lot and forcing me to look ahead and plan appropriately.
Saturday, 4 April 2015
Showreel Submission
So we have been asked to put forward parts of our work that can be showcased in the showreel. I have put together a 30 second video that acts as a trailer to my final piece. It must be noted that this can still be edited by those in-charge of putting together the showreel.
Personal Notes
This was a difficult process, especially with the specifications required when putting forward. I have tried my best to have it with the best possible graphics/framerate, however, it still came out not 100% desired. Having said that, I am still pleased with this clip and feels it shows my work well.
Friday, 27 March 2015
Media Test - Level Streaming
For a while now, my game has become very slowly which has been very frustrating. I have been trying to figure out ways of fixing this which has taken me such a long time. The frustration has also slowed my progression in development as I have felt irritated. However, I have now found a solution and have finally fixed this problem!
Level Streaming
Level Streaming is an effective method to make a game much more efficient. It enables you to easily load in or out certain parts of your game. This means that if there is an area that the player cannot see, you can save rendering process by loading this part out and only loading it in when the user is going to see it.
Finding the Issue
At first I thought my level was slow due to so much lighting. I ended up deleting a lot of lights to help improve my game. This helped only slightly. Thankfully, it did not effect the ambiance of the environment too much as it was after all a horror game in which, darkness always entices atmosphere. After further reading I read that fully opaque materials can use up a lot of rendering process. With this in mind, I changed all my opaque materials to be fully visible, however, nothing much improved.
I then looked into level streaming and thought that this actually may end up solving my issues. I found this really helpful tutorial on Youtube:
https://www.youtube.com/watch?v=jqdz9n-7H_A
Using this I quicky tested in by splitting my environment in two. Apart from lots of errors to due coding links being broken etc, it worked perfectly. My game was running so smoothly I couldn't believe it!
I then went ahead and decided to split up all the extra rooms I have and have them stream in nad out depending on where the player is (via trigger boxes).
This has helped dramatically and the only issue I occurred was in relation to blueprint references and matinee's etc. The reason being, I could not find a way to call these functions/variables in different levels. It was easier for my to just make the assets in the room that were not referenced in blueprint as the level's pieces. E.g with the levels that are not loaded in (the assets are not there) trigger boxes and matinees still sit there.) thankfully these to not take up much memory so it is ok to leave them there.
Level Streaming
Level Streaming is an effective method to make a game much more efficient. It enables you to easily load in or out certain parts of your game. This means that if there is an area that the player cannot see, you can save rendering process by loading this part out and only loading it in when the user is going to see it.
Finding the Issue
At first I thought my level was slow due to so much lighting. I ended up deleting a lot of lights to help improve my game. This helped only slightly. Thankfully, it did not effect the ambiance of the environment too much as it was after all a horror game in which, darkness always entices atmosphere. After further reading I read that fully opaque materials can use up a lot of rendering process. With this in mind, I changed all my opaque materials to be fully visible, however, nothing much improved.
I then looked into level streaming and thought that this actually may end up solving my issues. I found this really helpful tutorial on Youtube:
https://www.youtube.com/watch?v=jqdz9n-7H_A
Using this I quicky tested in by splitting my environment in two. Apart from lots of errors to due coding links being broken etc, it worked perfectly. My game was running so smoothly I couldn't believe it!
I then went ahead and decided to split up all the extra rooms I have and have them stream in nad out depending on where the player is (via trigger boxes).
![]() |
| Media Test - Level Streaming |
Personal Notes
This has been an extremely annoying hindrance for my process (the slow frame-rate). I am so glad that I have fixed this using level streaming. This does mean I am a little behind plan but at this point, I am not overly fussed as I am happy to have just solved this major issue I was having. I still aim to have an 'Alpha' version of my game completed on Monday, as well as starting my dissertation.
Media Test - Linear to Non-Linear Story
All along I wanted this story to be experienced in a non-linear fashion. However, I felt best to approach the development of it by creating it as a linear story and upon completion, converting it into a non-linear story.
Linear
To begin with I created my story events in a linear process, which would result in the playback of these events, happening in a linear process. I had 5 events:
Linear
To begin with I created my story events in a linear process, which would result in the playback of these events, happening in a linear process. I had 5 events:
- Gravity Law
- Mother Issues
- Death Of A Soldier
- Fire At Orphanage
- Family Death
These were created in this order and therefore occured, in this order. I wanted to convert this so that you could experience events 1-4 in any order with event 5 being the conclusion/ending. In order to achieve this I needed to 're-wire' my level blueprints in order to accommodate some complex calculations.
Non-Linear
I got started on attempting to make my story non-linear and was happy to find it not overly difficult. The main concern was that in my linear story, each event, triggered some sort of change in the environment. This worked well, however, if I was to make it non-linear, I would still want the environment change to happen in the order I chose. The order being:
- Environment De-saturates
- Roof changes
- Walls/Floors become a Half-State (Hotel/Asylum)
- Walls/Floors compeltely change from Half-State to Asylum
- Game ends
This required some careful though but it was easily managed after much consideration:
![]() |
| Media Test - Linear to Non-Linear |
As you can see in the image above, the 'Linear (before)' image shows how each event looked before converting it. They each had a trigger boxes that would trigger the event and change the environment. Very simple and very effective. Now, the two images below that, show how it has been converted into a non-linear story. All the different trigger boxes link into the same switch node. This helped manage what environment change would happen as it would cycle through them in the correct order, alternating the environment correctly.
In order for the correct event to happen (not shown here) I had to insert a 'call function' node just after each 'doOnce' node. Each of these functions were different and would reference the different events that would happen in the story. E.g player hits trigger box ('TriggerBoxMotherIssues01') then this would call that event and play it, and then the environment would change depending on number the 'environment change' was on. So if this happened to be the 3rd event triggered in the game, it would be the 3rd environment change that would occur which is the Half-State.
Personal Notes
I was really happy to achieve this all so easily. I really enjoy using the level blueprints as it is very similar to hard coding which is something I have enjoyed in the past. I am playing a little bit of catch-up with my blogs as things have gotten slower this past few weeks. The main reason being that my games frame-rate has gotten extremely slow and has been frustrating to work with. I have now fixed this issue which I will discuss in the next blog.
Thursday, 19 February 2015
Event01 - Laws of Gravity - Progress
So I have been carrying out work on my first even which involves feathers floatign about an open hallway. Upon entering this hallway - music will play and feathers will slowly fall from the ceiling. Hammers will also start appearing on the floor before fading out. In the middle of the hall on the wall will be two sheets of paper - explaining the memory that is being portrayed.
Where I Am At
So far I have managed to get a lot of this sequence complete. I had to change a few ideas around in order to make it work but here is the progress of triggering of the music and feathers:
Triggering The Music
Adding In A Few Feathers
End Result (So Far)
Where I Am At
So far I have managed to get a lot of this sequence complete. I had to change a few ideas around in order to make it work but here is the progress of triggering of the music and feathers:
Triggering The Music
Adding In A Few Feathers
End Result (So Far)
![]() |
| Using The Matinee |
Personal Notes
The rest of this week will be dedicated towards research and journal finding. I am pleased with my progress and was just unfortunate with time not to get a little further. I will give myself all of Monday to finish of this event as much as possible before moving on to the next. My idea is to have all events completed within March to a standard level. I can then use April to polish everythign ready for my final submission.
Sunday, 15 February 2015
Last Year's Blogs
I have been looking at last years blogs - as recommended by my supervisor - and I have noticed a few things:
- They are very personal - much more personal than I would of expected (in terms of writing)
- They seem surprisingly short - not as much posts as I had imagined
I want too check that my blog is going down the right line. I am a little worried I have too much posts however I was told to blog as much research and practical stuff I could. I have seen my blog improve over the year as at the beginning, it lacked in direction and structure. I have managed to have more of a structure and for the rest of the semester I would like to improve on the information I write and try and be much more 'professionally' critical when looking at other pieces as well as my own.
I feel that one thing I am lacking in blogging is when I look at other media pieces. I have looked at games and some films but I never seem too blog about them. I know this is important and I look to catch up on the ones I have not done and make sure I blog about future practices.
Saturday, 14 February 2015
Progress Report - Creating the Starting Bedroom
This week I wanted to complete the bedroom scene which is where the player starts. It is here that they have the chance to discover who they are and why they are there. There will also be a subtle hint into what may lay ahead.
![]() |
| Using NCloth - Maya |
![]() |
| Bedroom Progress - UE4 |
![]() |
| Story Items |
Personal Notes
My next plan of action is:
- Complete some tasks that were set out by supervisor
- look into 'drawTexture' Node
- Look into changing mesh during game play - using opaqueness
- Polish Room
I am wanting to use techniques learnt from previous research to help entice and encourage the player to play the game - do a little, receive a lot, add some hidden items etc
Wednesday, 4 February 2015
Media Test - Dynamic Materials
I successfully managed to alter the saturation levels in my previous test however, then next step was actually changing the materials. Once again, this was quite a daunting task however I knew I would be able to find away. In my supervisor meeting, two techniques were mentioned - Vertex Painting and Lerping. I had already come across lerping and so began with that. I eventuially stumbled onto this tutorial which worked perfectly for what I wanted to achieve:
https://www.youtube.com/watch?v=mikG9ZuM2gY
Like with my last media test, I decided to take it one step at a time. I began with create a sphere - like in the tutorial, and used that as my test:
After achieving this, I went on to doing the same but for one of my own materials:
This process is simply consisting of using the blueprint and the matinee. The blueprint is basically the code, programming what is happening and the matinee is where you set up the animation with time and value settings. After testing it on a couple of tiles, I then applied it to all of the 'FloorMain' tiles.
https://www.youtube.com/watch?v=mikG9ZuM2gY
Like with my last media test, I decided to take it one step at a time. I began with create a sphere - like in the tutorial, and used that as my test:
After achieving this, I went on to doing the same but for one of my own materials:
This process is simply consisting of using the blueprint and the matinee. The blueprint is basically the code, programming what is happening and the matinee is where you set up the animation with time and value settings. After testing it on a couple of tiles, I then applied it to all of the 'FloorMain' tiles.
![]() |
| Media Test - Dynamic Materials |
Finished Result
Personal Notes
Again, I am very happy with my result. The next step I wish to take in this process is figuring out a way to make the change over more random/interesting - perhaps with particle effects. Almost as if the hotel pieces burn away into the asylum pieces. I also need to figure out what too do with meshes as for example, the wall mesh will need to completely change. This is one step further from materials but it is something I need to look into.
Saturday, 31 January 2015
Media Test - De-saturating the Environment
Now that I have decided to have my environment deteriorate throughout the game, I have decided to look into transforming materials and I have been looking at de-saturating them first.
I have spent a long time working on this and been through many tutorials but the one that worked best for me was this one:
https://docs.unrealengine.com/latest/INT/Engine/Rendering/Materials/ParameterCollections/index.html
This involves using a 'master parameter' to adjust the whole environment. First I followed through the tutorial using blank squares to test it out. I managed to get this to work relatively easily:
Here, the coloured squares de-saturated every time I held the right mouse key down. On release, they would return to their original colour. This was very pleasing to see as it had taken me some time to find a relevant tutorial to help me.
After I had done this it was time to apply this technique to my textures. An issue I had was that the coloured squares where instances of each other and so needed no editing, however, my textures would each need to have the required blueprint attached to them.
I have spent a long time working on this and been through many tutorials but the one that worked best for me was this one:
https://docs.unrealengine.com/latest/INT/Engine/Rendering/Materials/ParameterCollections/index.html
This involves using a 'master parameter' to adjust the whole environment. First I followed through the tutorial using blank squares to test it out. I managed to get this to work relatively easily:
Here, the coloured squares de-saturated every time I held the right mouse key down. On release, they would return to their original colour. This was very pleasing to see as it had taken me some time to find a relevant tutorial to help me.
After I had done this it was time to apply this technique to my textures. An issue I had was that the coloured squares where instances of each other and so needed no editing, however, my textures would each need to have the required blueprint attached to them.
Finished Result
Once I had figured out how to work it I edited all the material blueprints and manage to get myself a nice effect:
![]() |
| Media Test - De-saturating the Environment |
Personal Notes
When it comes to the final piece, I intend to use this feature through a trigger. When a player enters and then leaves a room - the environment will change - right before their eyes. Visually this could be very interesting for the player and provide an effective story telling method. Initial thoughts are having 5 rooms and therefore 5 stages. The next step for this test will be to ensure I can change from one texture to another.
Wednesday, 28 January 2015
Scaling/Proportion Issues
It was noted that in my media testing from semester one, the hallway I created in UDK looked very squashed and proportionally incorrect. My supervisor recommended I fix this issue immediately before I go ahead and create more assets.
I managed to get myself Unreal Engine 4 and so now my final piece will be produced through that. Already I am finding the interface much more friendly and appealing than UDK was so I am very pleased with the switch. As for sorting the scale and proportion issue, I ran into some similar problems when trying to edit it in Unreal Engine 4:
Looking at the final result I am happy with the change I have made. It looks a lot better in scale and I will now go on to creating a more thorough block-out of the hallway before moving onto the rooms.
One thing I have noticed is there is an odd perspective issue which I mentioned in the second picture. Things look oddly small from a minor distance but once up and close, it looks fine.
I managed to get myself Unreal Engine 4 and so now my final piece will be produced through that. Already I am finding the interface much more friendly and appealing than UDK was so I am very pleased with the switch. As for sorting the scale and proportion issue, I ran into some similar problems when trying to edit it in Unreal Engine 4:
![]() |
| Scaling Issue |
![]() |
| Perspective Issue |
![]() |
| Final Result |
Looking at the final result I am happy with the change I have made. It looks a lot better in scale and I will now go on to creating a more thorough block-out of the hallway before moving onto the rooms.
One thing I have noticed is there is an odd perspective issue which I mentioned in the second picture. Things look oddly small from a minor distance but once up and close, it looks fine.
Sunday, 30 November 2014
3D Practice - SciFi Object
This was the final chapter of Michael McKinley's 'Game Environments and Props'. It combined everything that had been learnt so far plus a few extra things here and there in order to create a sci fi object.
By now, these chapters are relatively straight forward which shows how I have progressed well. There are however some issues that did appear, which as per usual, cost me time and with some cases, time wasted as I could not fix them. However I am really pleased with how my skills have developed through using this book and how it as helped me with my project. I have learnt many new features which I can definitely apply to my project in order to make it much more professional.
By now, these chapters are relatively straight forward which shows how I have progressed well. There are however some issues that did appear, which as per usual, cost me time and with some cases, time wasted as I could not fix them. However I am really pleased with how my skills have developed through using this book and how it as helped me with my project. I have learnt many new features which I can definitely apply to my project in order to make it much more professional.
![]() |
| Project: SciFi Object |
The Steps
- Create Hi Poly model
- Create Low Poly version
- UV map Low poly model
- Using transfer maps to create initial textures
- Edit textures in Photoshop
- Apply these textures to model
- Animate
Learning Outcomes
It was nice to apply all the techniques I have learnt from this book to one final model. So for this piece, nothing new was really taught however I did come across some problems which I could not fix. Trying to achieve a glow effect using a cone mesh sadly did not even nearly work. I tried messign about with the settings but nothing seemed to work. The other issue was when I rendered my final image, it came out with a really obvious glow which looked terrible and again, I could not sort it.
These issues are always a nightmare to try and fix as I sometimes have no clue on where to start. In some cases (Like I did here) I will just have to try leaving the part out.
![]() |
| Project: SciFi Object - Problems |
Personal Notes
I have found this book to be so useful in developing my 3D and Photoshop skills. It has been very enjoyable and thorough in its projects. I'd hope for more books like this but I am not sure if there are (in date) however now I have completed every chapter except one. I left this one to complete just before I come back to semester 2 as a kind of warm up exercise. It's a project on making a car, which is not linked to my final project however it can be used as the perfect warm up piece to keep me on form ready for semester 2. I would highly recommend this book to anyone carrying out 3D practices - especially for those at intermediate level who need a little more confidence and guidance in Maya.
Friday, 28 November 2014
3D Practice - An Animated Industrial Fan
This chapter of Michael McKinley's 'Game Environment and Props' involved creating an industrial fan and animating it in order for a more interesting background object. This project was relatively simple but showed how you can enhance your environment very easily.
![]() |
| Project: Creating an Industrial Fan |
The Steps
- Create the high poly model
- Create the low poly model
- UV Map the low poly model
- Texture the Low Poly Model
- Animate it
Learning Outcomes
This project did not produce much in terms of learning outcomes for me. The only issue I had which I have had before so know how to sort it is the transferring of an ambient occlusion map. This was the only issue I had. As for learning, the only kind of new aspect for me was the animation. It was nice to see how easy it was to animate a simple object.
Personal Notes
This was a really interesting project which showed how easily it is to enhance an environment. What I must try and do is apply this technique in an gaming environment. This was one of the issues raised at my progress presentation - to bring an asset in UDK and work with it in there in order to help develop a feel and ease back into using UDK. This might be the perfect object to use (Or my own version of it) as it incorporates animation as well as anything else. If I can get a feature like this working in UDK I would be really pleased.
Wednesday, 26 November 2014
3D Practice - Building a Skyscraper
This was chapter 5 of Michael McKinley's 'Game Environments and Props'. I have started to relate these 3D practices to Don Carsons theories of creating immersive environments using environmental storytelling techniques, similarly used in theme parks:
http://www.primitive-eye.com/pdf_files/Enviromental_storytelling_pt1.pdf
'...medieval cathedral or even a large old church, there is a reason the vast interior is so awe inspiring. What you may not realize when you enter, is that the architects of these places have forced you to enter the church through a small confined space, before revealing the monumental interior of the main church. This is done quite on purpose, and it is the contrasting effect of having been confined in a small space that makes the adjacent room all the more dramatic.'
http://www.primitive-eye.com/pdf_files/Enviromental_storytelling_pt1.pdf
So this project was all about modular design which is highly important for the project I am planning to do. I did occur some issues here which more relate to my cleanliness of 3D modelling. The book starts to encourage you to do parts yourself and this is where I start to fault. Oddly enough I am normally ok but when following a book so far, being expected to start continuing with sections with no help can be quite difficult.
![]() |
| 3D Practice - Building a Skyscraper |
The Steps
- Carefully plan modular design
- Create a high poly version
- Create a low poly version
- UV Map the low poly version
- Create the textures using the Transfer Maps Function
- Use Photoshop to edit textures
- Apply to low poly piece
- Fit pieces together
Learning Outcomes
For this project, nothing completely new to me was applied. This ended up being more practice than learning however one issue which I had (which I have had before) came up but I simply fixed it (like I fixed it before).
![]() |
| Ambient Occlusion Map Issues |
It was the ambient occlusion map. Annoyingly enough it seems I cannot create an ambient occlusion map for a number of assets at once. This was no problem. I simply created a map for each piece and then edited them together in photoshop. As you can see from above it is an easy process and did not take up much time. When speaking with a lecturer about these issue he seems to think it's an issue with this version of Maya (2011).
Moving forward with this issue I am going to continue with this method but if it appears to come out drastically wrong. I can always use the UV Snapshot to create my own ambient occlusion map.
Personal Notes
Relating to Don Carsons techniques, I am going to use this practice as guidance into looking at 'Contrasting Elements'. Carson states that havign contrasting elements in an environment can help entice and keep the user interested. He mentions:
With this theory in mind I am going to put it to practice by enhancing the hallway I have been working on and insert, through access of a door, a much larger room, perhaps a grand hall of some sort. This contrasting effect should hopefully spark and interesting vibe within the environment, enticing the player to continue.
Tuesday, 18 November 2014
3D Practice - Light
Knowing that lighting is important in creating a realistic atmosphere I went ahead and carried out Chapter 6 of 'Game Environments and Props' by Michael McKinley. This covers how to create a realistic looking light using different types of maps as oppose to an actual Maya light.
![]() |
| Project: Creating a Wall Sconce |
The Steps
- Create a high poly version.
- Create a low poly version.
- UV Map the low poly version.
- Create the textures needed using the Transfer Maps function
- Use Photoshop to edit textures.
- Apply to low poly piece.
Learning Outcomes
![]() |
| UV Mapping Technique |
UV mapping has always caused me issues in knowing what to exactly do. This use of overlapping UV's has help in creating a quick duplicate texture map for parts of the light.
![]() |
| Problems That Occured |
These issues caused a huge amount of disrupt to the time set out to complete this task. The is something I need to bare in mind for the final piece.
Personal Notes
This task stressed my out quite a lot. It seems simple but when something does not work and you spend hours attempting to fix it or at least find out what the issue is and simply cannot find it, it is a tremendous waste of time. This is important to take note when creating my final piece as I can't afford to waste much time or trivial features.
Sunday, 9 November 2014
Week 9 - 3D Practice - Weapons
Chapter 3 of Michael McKinley's 'Game Environments and Props' was showing you how to model a well detailed gun. Up to know I have not been concentrating as much on my actual project in regards to practical work. These 3D practices have been more too get me back up to speed with Maya as well as learning some new useful techniques. I will still be carrying these out over the next few weeks but not in as much detail. I am going to focus on media testing and concepts ready for my hand ins.
I will not be going over exactly what I did in this chapter as it has purely been for practice but basically I modeled a high resolution gun, then adapted a low resolution version which was used for the UV maps.
I will not be going over exactly what I did in this chapter as it has purely been for practice but basically I modeled a high resolution gun, then adapted a low resolution version which was used for the UV maps.
![]() |
| Project: Creating a Gun |
Personal Notes
As stated, due to time constraints, I am not going to waste too much time discussing this project as it was merely a modelling exercise. However what I will be carry out in the next few weeks is:
- Concepts/Story Ideas
- Media Tests
- Modelling Environment Examples
This is in preparation for my hand ins in a few weeks time.
Monday, 3 November 2014
3D Practice - Foliage
Continuing with Chapter 2 of 'Game Environments and Props' by Michael McKinley my next foliage task was to create a tree. This incorporated a very similar approach to before which helped cement the techniques used into my mind. The techniques used a very effective and efficient in creating quick props and items for 3D environments. Again, foliage is not going to be used much in my environment (maybe plant pots etc) but seeing how it has done has enhanced my knowledge of techniques that can be used in Maya and Photoshop.
![]() |
| Project: Creating A Savannah Tree |
The Steps
- First I created the tree trunk. I created a polygon cylinder and deformed it. After this I created the branches using the CV curve tool.
- Creating the smaller branches was done with curves also except this time, using a NURBS circle to create the radius for the branches.
- The leaves were created in bulks to save time. Each bulk of leaves was duplicated and altered to maintain a random effect. In order for less polys - a snapshot of these bulks were created and then applied to a plane and the plane was used as the main leave geometry.
- The same process was used to create the filler leaves. This really helped to quickly bulk out the tree.
- Next I created the bark in Photoshop. The leaves and branches were just coloured through Maya.
- The last part was correctly UV mapping the tree trunk in order to allow the bark too look accurate and appear seemless.
Learning Outcomes
I haven't learnt much more than I did in the previous part of the chapter. This is due to the tasks carrying out similar procedures however there is one part I would like to write about, due too it's usefulness and efficiency.
Using a Snapshot as a Texture
![]() |
| Using a snapshot as a texture |
A very useful technique was used to create the leaves on the tree. As oppose too modelling each individual one which would require lots of memory and would be incredibly costly, a technique was used that not only sped up the process but only required a plane to show a whole bunch of leaves. To begin with you create a small branch covered in leaves. You then set up the top view camera to only view a certain size plan in your scene. With this plane you would capture an image shot of your branch and leaves. With this image, you then create a plane of the same size and apply this image to the plane. With this complete you can add extra edges to the plane and move the vertices slightly in order to give the impression of depth.
Personal Notes
Even though my environment will not need much foliage if any at all, this chapter has still shown me some essential skills in Maya and in Photoshop. I must comment that all the settings used in Photoshop cannot necessarily be learnt. They are tampered with until the artist feels it looks right. The best I can take in with regards to the Photoshop sections is the understanding of different features so that I can apply these to my designs later. It is now Monday and I am a bit behind on what I wanted too complete over the weekend. This means I am behind on the week. I will be looking to have caught up by the end of this week. Here's what I am wanting to have completed by Sunday night:
- Finish Case study and blog a summary of it
- Carry out Chapter 3 of Game Environments and Props + blog post
- Carry out a few research blogs using journals/internet
- Have a meeting with a lecturer
- Draft my Research Proposal using Student Handbook
The next few weeks I am going to be focusing a lot on hand in materials so this week I am looking to get some ideas in my mind ready to start bringing things together in the next few weeks.
Subscribe to:
Posts (Atom)





















